Furnace Installation in Town and Country, Missouri 63017, 63131, and 63141

Furnace installation in Town and Country reflects the same multi-system estate home patterns as AC installation: 2 to 4 separate furnaces serving different wings or floors of homes typically 3,500–6,500+ sf, with modulating 96–99% AFUE equipment standard across the major communicating-system manufacturers (Carrier Infinity, Trane ComfortLink II, Lennox iHarmony, Bryant Evolution), integrated with the matched AC equipment serving the same systems and zones. Most Town and Country furnace installations happen as part of combined AC + furnace replacement covering an entire multi-system installation rather than single-equipment replacement, with total project cost typically ranging from $32,000 for 2-system replacement to well over $100,000 for the largest multi-system configurations with extensive zoning and specialty heating equipment. Combination boilers serving both space heating and domestic hot water provide premium alternative for homes prioritizing tankless hot water delivery.

Furnace Configurations for Town and Country Estate Homes

Standard Premium Furnace per System

Each system in a multi-system installation typically uses premium furnace equipment:

• 80,000 BTU/hr 96% AFUE modulating for 1,800-2,200 sf zone: $9,800–$13,800 installed
• 100,000 BTU/hr 96% AFUE modulating for 2,200-3,000 sf zone: $11,800–$15,800 installed
• 120,000 BTU/hr 96-99% AFUE for 3,000+ sf zone: $13,800–$17,800 installed
• Highest-efficiency Lennox SLP99V: add $1,800–$3,800 over standard 96% AFUE for 99% AFUE equipment

Combined AC + Furnace Replacement per System

Combined installations with matched system equipment:

• 3 ton AC + 80,000 BTU 96% AFUE furnace + communicating thermostat per system: $17,800–$22,800 installed
• 4 ton AC + 100,000 BTU 96% AFUE furnace + communicating thermostat per system: $19,800–$24,500 installed
• 5 ton AC + 120,000 BTU 96-99% AFUE furnace + communicating thermostat per system: $22,800–$28,800 installed
• Lennox SL28XCV + SLP99V combination: $22,800–$32,500 installed for highest-efficiency residential combination

Multi-System Configurations

• 2-system replacement for 3,500-5,000 sf homes: 1 main system + 1 upper system; $32,000–$54,000 installed total
• 3-system replacement for 4,500-6,000 sf homes: main + upper + lower or wing systems; $46,000–$78,000 installed total
• 4+ system replacement for 6,000+ sf homes: multiple wings or floors plus specialty systems; $62,000–$110,000+ installed total

Premium Equipment Manufacturer Options

Carrier Infinity 96/98 Furnaces

• Carrier Infinity 98 AFUE Modulating Gas Furnace: 98% AFUE with variable-speed ECM blower; communicating with Infinity Touch Thermostat; ultra-quiet 65 dB operation
• Carrier Infinity 96 AFUE Modulating Gas Furnace: 96% AFUE with variable-speed ECM; communicating; broader equipment range
• Per-system pricing for Carrier furnace alone: $11,800–$15,800 for 100,000 BTU 96% modulating

Trane S9V2/XV95 Furnaces

• Trane S9V2 96 AFUE Modulating Variable-Speed Furnace: 96% AFUE modulating gas valve; ComfortLink II communicating; variable-speed ECM blower
• Trane XV95 96 AFUE: alternative model with similar features
• Per-system pricing for Trane furnace alone: $12,400–$16,400 for 100,000 BTU 96% modulating

Lennox SLP99V/SL297NV Furnaces

• Lennox SLP99V 99 AFUE Modulating Variable-Speed Furnace: 99% AFUE highest-efficiency residential furnace; iComfort S30 thermostat integration
• Lennox SL297NV 97 AFUE Modulating: alternative with slightly lower efficiency at lower price point
• Per-system pricing for Lennox SLP99V: $14,800–$18,800 for 100,000 BTU 99% modulating

Bryant Evolution Modulating Furnaces

Sister brand to Carrier with equivalent features and pricing; same diagnostic and parts coverage.

Combination Boiler Alternative

For Town and Country homes considering integrated heating + domestic hot water:

• Combi boiler installation per system area: $14,800–$22,800 installed depending on capacity
• Manufacturers: Navien (premium combi specialty), Triangle Tube Prestige, Weil-McLain Aspen, Lochinvar
• Benefits: tankless hot water with unlimited supply; space savings (eliminates separate water heater); efficient operation; longer service life than tank water heaters
• Considerations: gas service capacity verification needed for high peak demand; simultaneous hot water demand at multiple fixtures may exceed combi capacity (typically 6-8 gpm for premium residential combi); not all combi installations integrate seamlessly with multi-zone hydronic distribution

Radiant Floor Heating Additions

Many Town and Country estate homes include radiant floor heating in luxury bathrooms, kitchens, and other areas:

• Per-zone radiant floor heating installation: $4,800–$12,800 installed depending on area and complexity
• Dedicated low-temperature boiler for radiant heating zones: $8,800–$14,800 installed (often combined with main furnace replacement)
• Integration with primary forced-air heating: thermostat zoning coordinates radiant floor with forced-air system
• Best fit for: master bathrooms, kitchens with stone or tile flooring, mudrooms, basement spaces

Town and Country-Specific Installation Considerations

Estate Home Installation Logistics

• Coordinated multi-system installation: phased over multiple days to maintain partial home operation
• Site protection: extensive use of protective materials in finished spaces during equipment removal and installation
• Staff and family coordination: installation scheduling around estate home routines
• Long service truck routes: equipment delivery and disposal coordination for larger installations

Smart Home Integration

HVAC integration with home automation platforms:

• Control4, Crestron, Savant integration: communicating thermostat APIs integrated with home automation
• Custom dashboards: unified view of all furnaces, AC systems, and zones
• Schedule integration: HVAC schedules coordinated with home automation occupancy detection
• Weather data: predictive heating based on weather forecasts

R-454B Refrigerant Transition Considerations

Furnace installations typically accompany AC installations; refrigerant transition applies to AC equipment:

• R-454B used for new AC equipment per January 2025 AIM Act phase-down
• Furnace installation itself not refrigerant-related
• Combined system installations use R-454B for new AC + matched furnace

Permit and Inspection

Town and Country Public Works at (314) 432-6606 handles furnace installation permits. Permit fees $180–$580 reflecting larger installation scope. Inspector scheduling 1–5 business days. Multi-system installations may have multiple permits. Combustion analysis with Bacharach Fyrite Insight Plus documented at installation completion for each system.

Frequently Asked Questions

How much does furnace installation cost in Town and Country?

Pricing reflects multi-system estate home configurations. Per-system furnace alone (with existing AC continuing): 80,000 BTU 96% AFUE modulating for 1,800-2,200 sf zone $9,800-$13,800 installed; 100,000 BTU 96% AFUE modulating for 2,200-3,000 sf zone $11,800-$15,800 installed; 120,000 BTU 96-99% AFUE for 3,000+ sf zone $13,800-$17,800 installed; Lennox SLP99V 99% AFUE adds $1,800-$3,800 over standard 96% AFUE. Combined AC + furnace replacement per system: 3 ton AC + 80,000 BTU 96% AFUE furnace + communicating thermostat $17,800-$22,800 installed per system; 4 ton AC + 100,000 BTU 96% AFUE per system $19,800-$24,500 installed; 5 ton AC + 120,000 BTU 96-99% AFUE per system $22,800-$28,800 installed; Lennox SL28XCV + SLP99V highest-efficiency combination $22,800-$32,500. Multi-system replacement totals: 2-system replacement for 3,500-5,000 sf $32,000-$54,000 total; 3-system replacement for 4,500-6,000 sf $46,000-$78,000 total; 4+ system replacement for 6,000+ sf $62,000-$110,000+ total. Combination boiler alternative: $14,800-$22,800 installed per area with manufacturers Navien, Triangle Tube Prestige, Weil-McLain Aspen, Lochinvar. Radiant floor heating additions: per-zone installation $4,800-$12,800; dedicated low-temperature boiler $8,800-$14,800. All pricing includes Manual J/S/D analysis per system, equipment, installation labor, PVC venting, condensate management, permits through Town and Country PW, post-installation inspection per system, manufacturer warranty registration, and Purisync 2-year labor warranty.

Should I get modulating furnaces or single/two-stage for my Town and Country home?

Modulating furnaces are the standard recommendation for Town and Country estate home installations, for several reasons specific to the housing type. Modulating gas valves allow continuous adjustment from 40% to 100% of rated capacity rather than the on/off operation of single-stage or two-position operation of two-stage equipment. Benefits specific to estate homes: longer cycle times provide better heat distribution across large floor areas (single-stage equipment cycles on/off frequently in mild weather, never reaching far edges of zones; modulating equipment runs longer at lower output, distributing heat throughout entire zone); quieter operation matters in larger homes where noise from cycling equipment is more noticeable (modulating equipment runs at lower output most of the time, producing less noise); better integration with variable-capacity AC equipment for matched-system operation across heating and cooling seasons; communicating system integration with smart thermostats and zoning works better with modulating equipment than with single-stage; ECM variable-speed blower coordination matches blower output to actual heat output for optimal distribution. Cost comparison: 100,000 BTU 96% AFUE modulating runs $11,800-$15,800 installed; 100,000 BTU 96% AFUE single-stage runs $9,400-$11,800 installed — premium typically $2,400-$4,000 per system. For 2-system installation, premium is $4,800-$8,000 total. For most Town and Country estate homes, the modulating premium pays off in comfort, distribution, and integration benefits over equipment service life.

What’s the difference between 96% and 99% AFUE furnaces?

3 percentage points of efficiency improvement with substantial cost premium. Standard high-efficiency: 96% AFUE represents premium tier for most residential furnaces; Carrier Infinity 96, Trane S9V2 96, Lennox SL297NV 97, and other major manufacturer offerings. Highest residential efficiency: Lennox SLP99V at 99% AFUE represents highest residential furnace efficiency available; achieves this through advanced heat exchanger design recovering more latent heat from combustion gases. Efficiency math: 99% AFUE saves approximately 3% additional gas consumption versus 96% AFUE, equating to $36-$60 annual gas savings per system for typical estate home heating load. Cost premium for SLP99V: $1,800-$3,800 over standard 96% AFUE equipment; simple payback 30-105 years on efficiency alone — substantially longer than typical equipment service life of 18-25 years. Reasons SLP99V may still be the right choice despite long payback: customer prioritizes maximum efficiency for environmental or status reasons; matched Lennox iHarmony system installation where SLP99V is the natural premium furnace pairing with SL28XCV variable-capacity AC; multi-system home where small per-system efficiency improvements compound across multiple systems; modulating operation across very wide capacity range (SLP99V modulates 35-100% vs 40-100% on most competitors). Reasons against SLP99V despite premium tier: budget allocation prioritizes other home improvements; standard 96% AFUE delivers 95%+ of the efficiency benefit at lower cost; matched system installations on Carrier or Trane equipment where SLP99V would mix manufacturers. We discuss 96% vs 99% during quote development based on home characteristics and customer priorities.

Should I install a combination boiler in my Town and Country home?

Sometimes — depends on home configuration and hot water demand. Combination boilers (combi) provide both space heating and domestic hot water in single equipment, replacing both the heating boiler/furnace and the separate water heater. Cost: $14,800-$22,800 installed per area depending on capacity and manufacturer (Navien premium combi specialty, Triangle Tube Prestige, Weil-McLain Aspen, Lochinvar). Operational benefits: tankless hot water with unlimited supply (no tank capacity limit; never run out of hot water); space savings from eliminating separate water heater; efficient operation (modulating combi boilers achieve 95-97% AFUE for both space heating and water heating); single equipment to maintain and service; longer service life than tank water heaters. Operational considerations: hot water flow rate limited by combi capacity (typically 6-8 gpm for premium residential combi vs. 2-5 gpm for budget models); simultaneous hot water demand at multiple fixtures may exceed combi capacity (matters more in estate homes with multiple bathrooms and kitchens); gas service capacity may need verification for higher peak demand; combi operation during heating season uses heating capacity for hot water priority which may briefly reduce heating output; not all combi installations integrate seamlessly with multi-zone hydronic distribution. Best fit for: estate homes with multiple bathrooms and high hot water demand where tankless unlimited supply matters more than budget; homes where space efficiency is valued; homes where modulating operation across heating and hot water provides best comfort. Less fit for: homes with very high simultaneous hot water demand exceeding 8-10 gpm peak (need multiple combi units or alternative configuration); homes with existing forced-air ductwork where converting to hydronic distribution would require substantial work; homes with limited gas service capacity. For some Town and Country homes, hybrid approach works best: combi boiler serving primary domestic hot water + radiant floor heating in luxury areas, plus separate forced-air furnaces serving general space heating. We discuss combi vs. separate equipment during installation planning.

How long does furnace installation take in Town and Country?

Multi-system estate home furnace installations typically take 3-7 days depending on system count and configuration. Process timing: quote consultation 2-4 hours for full home assessment with multiple system analysis; equipment ordering 5-15 business days (premium modulating equipment may have longer lead times than standard equipment, particularly for Lennox SLP99V or specialty boiler equipment); permits through Town and Country PW 3-5 business days; installation scheduling typically with planned phasing to maintain partial home operation during installation. Installation day breakdown: 2-system furnace replacement typically 2-3 days; 3-system furnace replacement typically 3-5 days; 4+ system furnace replacement typically 5-7 days; combined AC + furnace replacement adds 0-2 days per system depending on whether installations can be done in parallel; combination boiler installation typically 2 days per area including domestic hot water connections; radiant floor heating additions typically 2-4 days per area; smart home integration coordination adds 0.5-1 day; post-installation inspector visits 1-5 business days. Total project timeline: typically 4-8 weeks for standard multi-system furnace replacement, 8-12 weeks for installations with combination boilers, radiant floor additions, and smart home integration. Same-day emergency replacement: not typically feasible for full multi-system installation due to equipment lead times; single-system emergency replacement within multi-system home is feasible for catastrophic single-system failure when other systems can carry partial load during equipment ordering and installation period (1-3 weeks typical).

---

Contact Purisync Heating and Air

For furnace installation quotes in Town and Country, contact our 325 N Kirkwood Road office at (314) 338-5111. Initial consultation includes full home walk-through, Manual J/S/D analysis per system, equipment configuration options across Carrier Infinity, Trane ComfortLink II, Lennox iHarmony, and Bryant Evolution premium furnaces, combination boiler alternative discussion, radiant floor heating addition options, and written quote with itemized pricing across multi-system configurations.

• Emergency Line (24/7): (314) 338-5111
• Address: 325 N Kirkwood Rd #245, Kirkwood, MO 63122
• Email: info@purisyncheatingairconditioning.xyz
• St. Louis County Mechanical Contractor License: #MC-2014-08439-STL
• Kirkwood Business Registration: #BL-2014-1187
• EPA Section 608 Universal: #608U-2014-385721

Contact Us →

Office Hours

• Emergency Service: 24 hours a day, 7 days a week
• Office Staff: Monday – Saturday, 9:00 AM – 5:00 PM
• Closed: Sundays and State/Federal Holidays (emergency line always active)